CY5-SE
Synonyms: Cy5 NHS Ester; Sulfo-Cyanine5 Succinimidyl Ester
TD-D0819 纯度: ≥98.0%
|
| |
|
| 生物活性 |
|
Cy5-SE (Cy5 NHS Ester) is a reactive dye for the labeling of amino-groups in peptides, proteins, and oligonucleotides. This dye requires small amount of organic co-solvent (such as DMF or DMSO) to be used in labeling reaction. This reagent is ideal for very cost-efficient labeling of soluble proteins, as well as all kinds of peptides and oligonucleotides. This reagent also works well in organic solvents for small molecule labeling. Excitation (nm):649, Emission (nm): 670. |
|
体外研究
(In Vitro) |
|
指南 (以下是我们推荐的方案,本方案仅提供指南,应根据您的具体需求进行修改)。
SELP 类似物与 Cy5-SE 的结合。
1. 取 1 mL 100 mM 碳酸氢钠缓冲液 (pH 8.3) 配制的 100 μg/mL SELP 溶液与 10 μL 10% DMSO 配制的 1.2 mg/mL Cy5 单 NHS 酯混合,并在冰上孵育 2 小时。
2. 淬灭反应:将 50 μL 的 1 M Tris-HCl (pH 8.0) 添加到反应溶液中。
3. 将反应混合物上样到 1.5 mL Sephadex G-25 柱上,1050 g 离心 3 分钟洗脱 Cy5 标记的 SELP。
注意事项:
1.CY 染料对光及湿度敏感。即用即配 CY 溶液并丢弃未使用的部分。
2.低浓度的叠氮化钠 (≤3 mM 或 0.02%) 或硫柳汞 (≤0.02 mM 或 0.01%) 不会显著干扰蛋白标记;但是 20-50% 的甘油会降低标记效率。
3.避免使用含伯胺 (例如 Tris,甘氨酸) 或铵离子的缓冲液,它们与待标记蛋白会发生竞争反应降低标记效率。
4.未活化的染料,需先使用缩合液 (500 ug/mL) (25952-53-8) 活化后方可进行后续标记实验。
5.本产品仅限于专业人员的科学研究用,不得用于临床诊断或治疗,不得用于食品或药品。
6.为了您的安全和健康,请穿实验服并戴一次性手套操作。
Tanda has not independently confirmed the accuracy of these methods. They are for reference only. |
|
| 分子量 |
|
753.88 |
|
| Formula |
|
C37H43N3O10S2 |
|
| CAS 号 |
|
146368-14-1 |
|
| 性状 |
|
固体 |
|
| 颜色 |
|
Dark purple to black |
|
| Emission (Em) |
|
670 |
|
| Excitation (Ex) |
|
633 |
|
| 运输条件 |
|
Room temperature in continental US; may vary elsewhere. |
|
| 储存方式 |
|
-20°C, sealed storage, away from moisture and light |
|
| |
*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light) |
|
| 溶解性数据 |
细胞实验: |
DMSO 中的溶解度 : 25 mg/mL (33.16 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)
H2O 中的溶解度 : ≥ 5.88 mg/mL (7.80 mM) |
|
| * "≥" means soluble, but saturation unknown. |
|
| 配制储备液: |
| |
溶剂体积 质量
浓度 |
1 mg |
5 mg |
10 mg |
|
| 1 mM |
1.3265 mL |
6.6324 mL |
13.2647 mL |
| 5 mM |
0.2653 mL |
1.3265 Ml |
2.6529 mL |
| 10 mM |
0.1326 mL |
0.6632 mL |
1.3265 mL |
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。
* 备注:如您选择水作为储备液,请稀释至工作液后,再用 0.22 μm 的滤膜过滤除菌后使用。 |